Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
28
Aux in socket (3.5mm Jack)
1. Connect a stereo or mono audio source (ie iPod, MP3 or CD player) to
the Aux in socket. Information from your radio's display will disappear
- the backlight will be illuminated indicating that your radio is switched
on.
2. Adjust the Volume control on your iPod, MP3 or CD player for com-
fortable listening.
The Alarm/Timers will not operate while you have any connection
to the Aux in socket.
Note: When you connect the audio source your radio will be muted.
You must adjust the volume on your iPod, MP3 or CD player in order
to play the sound through your radio speakers.
3D sound switch
Your radio speakers may be altered to give a normal or a 3D sound
effect.
1. To give 3D sound, switch your 3D sound switch to 3D position.
2. To give normal sound, switch your 3D sound switch to normal.