RCA RT2350BK Stereo Receiver User Manual


 
Operating your Receiver
Retrieving preset stations
1. Press FM/AM to select tuner mode
2. Press MEMORY/MENU button to enter preset set-
ting mode (MEMORY icon shows on display), Press
TUNING UP/DOWN to select preset station.
6 Channel external input (RT2600 only)
An external decoder (Dts, Dolby Digital, etc…) or a
device with built-in multi-channel decoder and 6
channel output connector (DVD player, TV…) can be
connected to the 6CH input. It is therefore possible
to play any future 6 Channels coding (SACD, DVD
Audio) thanks to this connection. The external
decoder device will send the separated audio infor-
mation to the receiver that will then amplify the sig-
nal and send to appropriate speakers.
To activate 6 Channel external input, press the source
key on the receiver until 6 CH is selected or press
DVD/6 CH twice on the remote control.
18
TUNING ME
M
SOURCE
SOURCE
FM/AM
OK
A
M TUNING MEMORY
OPTICAL 1
OPTICAL 2
FR
SR
SUB
FL
SL
CEN
RT2600 ONLY
RT2600 ONLY
6 CH. EXTERNAL INPUT
SUBWOOFER
PRE OUT
T
FM/AM
SOURCE
SOURCE
NOTE
During 6-Channel direct input mode, TAPE OUT
and REC OUT of VCR mode will not be available.
NOTE
To enable all 6 CHANNELS in 6CH external Input
mode,make sure that when the receiver is in
DVD source, Dolby Prologic or Dolby digital/DTS
is always selected first before switching to
DVD/6 CH mode (otherwise only 2
channels/speakers will be enable in 6 CH mode).