RCA RT2350BK Stereo Receiver User Manual


 
EN
17
Operating your Receiver
Storing radio stations:
The receiver can store up to 40 radio stations in
memory. You can enter every single radio station
yourself or the receiver can store all available radio
station automatically in an ascending order.
Automatic preset storing : (FM only)
1. Select the band by pressing FM/AM
2- Press and hold
FM/AM on the main
unit for 3 seconds.
“MEMORY” will be dis-
played in red and will
blink during the auto-
matic storing process.
Radio frequencies will be scanned and radio station
stored automatically. When all available radio sta-
tions are stored or if all 40 memory locations are full,
the auto preset will stop.
Manual preset
1. Select FM or AM band by pressing FM/AM
repeatedly.
2. Tune to the radio station to be stored. (see
"Manual tuning" on page 16 above for details)
3. Press and hold the MEMORY button on the front
panel or MENU on the remote control. "MEMORY"
will flash and a preset number will be displayed on
the display.
4. Press TUNING
UP/DOWN, while
MEMORY is still flashing
to select the desired pre-
set memory location.
5. Press the MEMORY button on the front panel or
the remote control to store frequency in selected pre-
set location.
6. Repeat steps 1-5 to store other frequencies.
TUNING MEM
O
SOURCE
SOURCE
FM/AM
NOTE
Weak signal can affect the "Automatic Preset
Storing function" efficiency. Adjust the antenna
for the best reception for more efficient search.
MEMORY
C
E
C
E
FM/AM TUNING
TUNING MEM
SOURCE
SOURCE
FM/AM
TUNING ME
M
SOURCE
SOURCE
FM/AM
OK
TUNING MEMORY