Filter
Top Products
7
EN
CD Player
Setting Up a CD Program
You can program the CD player to play up to any 32
tracks on the CDs in the tray.
1. While the CD player is stopped, press SET to enter
program mode. The system displays the next avail-
able program number: “- - P:01,” with “- -” flashing,
prompts you for the first track in the program list.
2. Rotate MULTI JOG to select a track (press DISC
SKIP or DISK 1 - DISK 5
to select a track from a
different disc).
3. Immediately press SET
to assign the selected
track to the program number. After 3 seconds, you
are prompted for the next track in the program list.
(In CD program mode, PROG icon will be lit.)
Playing a Program List
While in PROGRAM mode, press PLAY.
Displaying the Program List
1. While the CD player is stopped, press SET to enter
PROGRAM mode.
2. Press SET repeatedly to list each track assignment
in the program list.
Deleting a Track from
a Program List
While in PROGRAM mode, display the programmed
track to be deleted (press SET if
necessary to cycle through the
list) and immediately press
STOP. To clear the whole
programmed list, press
and hold STOP for 5
seconds. The system
displays the message
CLEAR.
Automatically Skipping Tracks
(ATS)
Creating an ATS Program
1. Press STOP.
2. Press ATS to display “- - P:01"
3. Press DISC SKIP or DISC (1-5) to specify a disc.
4. Rotate the jog to specify the first track to skip, and
press SET.
5. Repeat the previous step to add more tracks to the
ATS program.
6. Press PLAY to play the ATS program.
Editing an ATS Program
1. Press STOP.
2. Press ATS.
3. Press SET repeatedly until the display shows the
track you want to change.
4. Press DISC SKIP or DISC (1-5) to specify a disc.
5. Rotate the jog to specify the replacement track to
be skipped, and press SET.
6. Repeat the previous step to change other previous-
ly programmed tracks.
7. Press PLAY to play the program.
Note: During ATS mode, ATS icon will be lit.
Skipping a Disk
Press DISC SKIP.
Searching Through a CD
Press and hold SKIP FORWARD/ BACKWARD
to search through a CD as it is playing.
Tip: You can create a
program of up to 32 tracks
Caution: Do not push to force clos-
ing of the tray during CD playback or
tray opening.
5 P:01
DIRECT DISC ACCESS
DISC
2
DISC
3
DISC
4
DISC
5
DISC
1
2520 IB US ENG 1/12/00 3:36 PM Page 11