Filter
Top Products
Recording
Selecting Tuner Band
1. Press SOURCE to enter Tuner mode.
2. Press BAND/ INFO to select between FM MW
or LW Radio band.
Tuning to a Station
Press or to select frequencies. Press
and hold or to scan frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
• Press to toggle TUNE and PRESET
mode until “Program” lights on the display.
• Press or to access the previous or
next preset station.
Auto Preset Programming
(FM only)
Press and hold the BAND/ INFO button for 2
seconds to scan stations in FM band. The stations
will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is
automatic upon pressing the button. You can
stop the automatic scan by pressing any button,
but the erased stations cannot be recovered.
Manually Setting Presets
1. Press the button to enter TUNE
mode.
2. Press or to access the desired
frequency.
3. Press the PROG button once and the most
recently accessed program location flashes on
the display.
4. If a different program location is preferred,
press or to move to the desired
preset number (1-32).
5. Press PROG to store the selected frequency at
that preset.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and
stereo mode. (Remote Only) “STEREO” is
displayed in stereo mode.
Radio
Tips:
Under PRESET mode, press or
can only acess the preset stations. Manaully
tuning is not accessible in this mode.
FM02
Program
91.10MHZ
FM
AUTO
P:02
91.10MHZ
EN
EN
16
15
Recording to mp3 player or USB device are
basically the same. You can record CD, Tuner or
AUX files to the mp3 player or USB device.
Recording CD to mp3 Player
Recording Standby
1. Connect the mp3 player to the USB port, “USB
Connected” will show on the display.
2. In CD stop mode, CD navigation mode or CD
pause mode, press REC PORTABLE
PLAYER.
3. Press to start CD playback and recording
will begin. This is indicated by the REC
mp3Player icon on the display.
4. Press to stop recording.
Recording
Example
(To record only selected tracks from a CD):
1. Create a CD program by following instructions
under “Setting Up a Program List” on page 18.
2. In CD stop mode or navigation mode, press
REC PORTABLE PLAYER.
3. From normal playback mode, press PROG to
enter program play mode. Playback and
recording begins automatically. The Prog
icon lights and REC mp3Player icon
flashes on the display.
4. Press or REC PORTABLE PLAYER to
stop recording.
Instant Recording
1. In CD playback mode, press REC
PORTABLE PLAYER to start recording. REC
mp3Player icon flashes on the display.
Recording Tuner / AUX to mp3
player
Instant Recording
1. In Tuner or AUX mode, press REC
PORTABLE PLAYER to start recording.
Recording
Example
1. In radio mode, select the station to record
(refer to page 15 for details).
2. Press REC PORTABLE PLAYER to start
recording.
3. Press or REC PORTABLE PLAYER to
stop recording.
FM
91.10MHZ
Note:
The encoding bitrate for tuner, CD
and AUX signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
Tips:
If CD playback is already started,
recording will begin instantly when REC
PORTABLE PLAYER is pressed.
If CD playback is stopped, playback and
recording will start instantly when REC
PORTABLE PLAYER is pressed.
Tips:
Recording stops automatically when
CD stops (Example: end of disc is reached).
0:20
SONG NAME
RS2050 EN 23/1/06 3:16 PM Page 22