Filter
Top Products
Installation
Chapter 1 7
Installing the Player in the Car
1. Rest the player in the center of the rear seat.
2. Insert the center seat’s safety belt through the player’s
retainer holes as shown.
IMPORTANT NOTE: Secure the player with as little slack in
the seatbelt as possible for safety. Tighten the seat belt
snugly so the player does not move out from the back of
the seat.
When the player is not in use the LCD screen should be
closed firmly. Do not place objects in the front storage
compartment other than the AC cord or the supplied car
cigarette lighter cord.
3. Fasten the safety belt strap by inserting and passing it
through the video player’s two end slot openings as shown.
4. Plug the cigarette lighter adapter into the DC POWER (CAR)
jack on the back panel of the player. Attach the other end
of the power cord to the car’s cigarette lighter.
Note: Make sure the car’s ignition is on before plugging
the player’s adapter into the cigarette lighter socket.
5. Adjust the LCD monitor angle for desired viewing.
6. If desired, connect headphones to either of the two
headphone jacks on the back of the player.