Filter
Top Products
Connections & Setup
2 chapter 1
Under Cabinet Mounting Instructions
Before Mounting
• Empty contents from the selected cabinet which the unit will be mounted.
• Clean the underside of the cabinet.
• We recommend the unit be mounted to the front edge of the cabinet.
Tools Required
• Drill and Drill Bit • Ruler or Tape Measure
• Nail or Awl • Scissors
• Phillips Screwdriver • Countersink (Optional)
• Masking Tape • Safety Glasses
Parts Packed With Your Unit
Screws: 4- 2 1/2” Phillips head screws Spacers: 4- 3/4”
4- 1 3/4” Phillips head screws 4- 1/2”
4- 1” Phillips head screws 4- 1/4”
Washers: 4 Cord Hooks: 2
Mounting Procedure
1. Position template in desired location
2. Use tape to hold template in position.
3. Drill four 4.5 mm (3/16”) holes at the locations shown.
4. Remove paper template.
5. Attach unit using four screws and spacers as required to adjust to desired height.
Once you have attached your unit to the cabinet you can use the supplied cord hooks to store excess cord.