Filter
Top Products
Introduction
Important Safety Instructions
Congratulations on your purchase of an RBH Sound Amplifier! Your amplifier is the result of many
years of research and development dedicated to producing powerful, accurate bass in home
audio systems. This manual contains operating procedures and specifications. We recommend
you thoroughly read through the material contained in this manual before connecting your
amplifier. This will ensure you have an understanding of how to setup and operate your amplifier
for optimum performance.
The lightning flash with the arrowhead symbol within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product enclosure that may be of sufficient magnitude to constitute a
risk of shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the product.
When using your amplifier, basic safety precautions should always be followed to reduce the risk
of fire, electric shock, and injury.
1. Read and understand all instructions in the users manual before operating the amplifier.
2. Retain this user manual for future reference.
3. Follow all warnings and instructions in this manual and any marked on the back of the amplifier.
4. The amplifier should be connected to a power supply compatible with the power consumption
requirements, see the specifications section of this manual.
5. If mounting the amplifier on a stand, the wall, or other device only do so as recommended by an
RBH Sound authorized technician.
6. Place the amplifier a safe distance from all heat sources such as radiators, stoves, or heaters.
7. Do not operate the amplifier near water—for example, near a bathtub, kitchen sink or in a wet
basement; or a swimming pool.
8. Power supply cords should be routed so they are not likely to be walked on or pinched by items
placed upon or against them.
9. Any service or repair required must be performed by qualified, RBH Sound authorized technician.
1
WARNING! Make certain the proper power cord is being used and the AC voltage selector switch
is set to either 115V or 230V to match the power voltage in your area.
This section describes the functions and/or use for each of the amplifier controls.
1. Voltage Selector Switch: Before connecting the amplifier to any power source make sure the
AC Voltage Selector is set to either 115V or 230V to match the power voltage in your area.
WARNING! If the voltage setting does not match the AC power supplied, damage to the
amplifier may result.
Amplier Controls and Setup