Filter
Top Products
13
Connecting Inputs
Connecting Four Speakers
1. Use a screwdriver to connect the front
left speaker’s positive (+) wire to the
amplifier’s
CH1 (+)
terminal.
2. Use a screwdriver to connect the front
left speaker’s negative (–) wire to the
amplifier’s
CH1 (–)
terminal.
3. Repeat Steps 1–2 to connect the front
right speaker’s positive (+) and negative
(–) wires to the amplifier’s
CH2 (+)
and
CH2 (–)
terminals.
4. Repeat Steps 1–3 to connect the rear
left and rear right speaker’s positive (+)
and negative (–) wires to the amplifier’s
CH3 (+)
,
CH3 (–)
,
CH4 (+)
,
and
CH4 (–)
ter-
minals.
Connecting Two Speakers (Unbridged Connection)
If you do not have high-power speakers, use
this connection.
This connection produces
65 watts per channel.
1. Use a screwdriver to connect the left
speaker’s positive (+) wire to the ampli-
fier’s
CH3 (+)
terminal.
2. Use a screwdriver to connect the left
speaker’s negative (–) wire to the ampli-
fier’s
CH3 (–)
terminal.
3. Repeat Steps 1–2 to connect the right
speaker’s positive (+) and negative (–)
wires to the amplifier’s
CH4 (+)
and
CH4
(–)
terminals.
CH1 Front
Left Speaker
CH2 Front
Right Speaker
CH3 Rear
Left Speaker
CH4 Rear
Right Speaker
Right Speaker
Left Speaker
12-2017.fm Page 13 Tuesday, May 9, 2000 10:02 AM