Filter
Top Products
8
Connecting Inputs
ˆ
Connecting Inputs
LOW-LEVEL INPUTS
You can connect your auto sound system’s low-level line out jacks to the amplifier’s low-level
line in jacks.
If your auto sound system does
not
have low-level line out jacks, see “High-Level (Speaker
Wire) Inputs” on Page 9 to connect your amplifier.
Note:
For the best results, use shielded audio cables (not supplied) available at your local Ra-
dioShack store.
1. Temporarily place the amplifier as close as possible to the selected mounting location.
2.
If your auto sound system has two line out jacks
, connect the auto sound system to the
amplifier as shown:
Note:
If your auto sound system has four separate line out jacks
, use the auto sound sys-
tem’s front left and right jacks to make this connection.
Auto Sound System
Right
Left
12-2014.fm Page 8 Tuesday, May 9, 2000 8:51 AM