Filter
Top Products
18
OPERATION
TURNING ON THE AMPLIFIER
The amplifier automatically turns on whenever you turn on your autosound sys-
tem. POWER lights when the amplifier is operating.
SETTING THE LEVEL CONTROL
For the best performance, you can adjust the level of the audio signals that enter
the amplifier by following these steps.
Cautions:
• The sound distorts if any output channel shorts. Turn off the amplifier and
try to locate the short.
• To prevent draining the vehicle’s battery, do not play the amplifier for too
long using the ignition switch’s ACC position after turning off the vehicle’s
ignition.
1. Using a flat blade screwdriver, turn both
LEVEL MIN/MAX
controls fully coun-
terclockwise to
MIN
.
Note:
The right level control is for the front speakers; the left level control is
for the rear speakers.
12-1976.fm Page 18 Tuesday, July 13, 1999 10:01 AM