Filter
Top Products
15
Connecting Two Speakers
If you are connecting only two speakers, you can connect them to the amplifier’s
front (
FL
and
FR
) or rear (
RL
and
RR
) speaker terminals.
1. Connect one end of a speaker wire’s marked conductor to the amplifier’s
FL
+
(front-left positive) or
RL
+
(rear-left positive) terminal.
2. Connect the end of the speaker wire’s unmarked conductor to the ampli-
fier’s
FL
−
(front-left negative) or
RL
−
(rear-left negative) terminal.
3. Repeat Steps 1 and 2 to connect a speaker wire to the amplifier’s
FR
+
and
FR
−
(front-right) or
RR
+
or
RR
−
(rear-right) terminals.
4. Connect the other ends of the speaker wires so
FL
connects to the front-left
speaker and
FR
to the front-right speaker, or
RL
connects to the rear-left
speaker and
RR
connects to the rear-right speaker.
12-1976.fm Page 15 Tuesday, July 13, 1999 10:01 AM