Filter
Top Products
4 – PYLE PRO PT3200/4000 Amplifier Owner’s Manual PYLE PRO PT3200/4000 Amplifier Owner’s Manual -5
PYLE PRO Audio, Inc.
1600 63rd Street
Brooklyn, NY 11204
Place
Stamp
Here
All PYLE PRO products are carefully constructed and tested before shipment.
Units purchased in the USA are warranted to be free of defects in material
and workmanship for two (2) years from the date of purchase. This warranty
is limited to the original retail purchaser of the amplifier.
Should the unit fail due to factory defects in material or workmanship, your
unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline
at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must
appear on the outside of your package and on all paperwork relating to your
return.
When returning the unit to us for warranty service, it must be carefully packed
and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing with the
product
• Include in your letter your return address, daytime phone number and
R.A. number
• Also include a check or money order for $15.00 for return shipping,
handling and insurance, or provide your Visa/MC number with
expiration date.
Our obligation under this warranty is limited to the repair or replacement of
the defective unit when it is returned to us prepaid. This warranty will be
considered void i f the unit was tampered with, improperly serviced or subject
to misuse, neglect or accidental damage.
Limited Warranty
Amplifier Specifications
Input Impedance, balanced (unbalanced)
Continuous Output Power
Stereo Mode
20 Hz to 20 kHz, 8 Ohms
1 kHz, 4 Ohms
Maximum Power, 8 Ohms
Maximum Power, 4 Ohms
Peak Power, 8 Ohms
Bridged Mode
20 Hz to 20 kHz, 8 Ohms
1 kHz, 8 Ohms
Peak Power
THD at rated output power
Frequency Response +/–3dB
Input Sensitivity for rated output power
Signal-to-Noise Ratio A-Weighted
Speaker Impedance
Stereo
Bridged
Power Requirement
Dimensions
HxWxD,inches
(mm)
Weight, lbs (kg)
20 k-Ohms (10 k-Ohms)
200W x 2
300W x 2
230W x 2
350W x 2
1600W x 2
500W x 1
600W x 1
3200W x 1
0.1%
10 Hz to 50 kHz
1.0V
100 dB
4-16 Ohms
8-16 Ohms
120 VAC, 60 Hz
3
15/32 x19x14
(88 x 482 x 355)
30.6 (13.96)
20 k-Ohms (10 k-Ohms)
260W x 2
400W x 2
300W x 2
450W x 2
2000W x 2
700W x 1
800W x 1
4000W x 1
0.1%
10 Hz to 50 kHz
1.0V
100 dB
4-16 Ohms
8-16 Ohms
120 VAC, 60 Hz
3 15/32 x19x14
(88 x 482 x 355)
33.0 (15.1)
PT3200 PT4000
Caring for your Pyle Pro Amplifier
Your Pyle Pro Amplifier is an example of superior design
and craftsmanship. The following suggestions will help you
care for your amplifier so you can enjoy years of use:
• Keep the amplifier dry. If it gets wet, wipe immediately.
• Use the amplifier only in well-ventilated installations.
• Handle the amplifier gently and carefully - do not drop!
• Keep the amplifier away from dust and dirt.
• Wipe occasionally with a damp cloth to keep it looking
new. Do not use harsh chemicals, solvents or
detergents!
Resetting the circuit breaker
This amplifier employs a circuit breaker for protection from
power surges and short circuits. If the amplifier suddenly
turns off or will not turn on, check the circuit breaker. If
it is tripped, check and correct for a short or overload
condition. Wait for the amplifier to cool, then press the
circuit breaker RESET button on the back of the amplifier.
Resetting the circuit breaker
This amplifier employs a circuit breaker for protection from
power surges and short circuits. If the amplifier suddenly
turns off or will not turn on, check the circuit breaker. If
it is tripped, check and correct for a short or overload
condition. Wait for the amplifier to cool, then press the
circuit breaker RESET button on the back of the amplifier.