Filter
Top Products
30
RECALLING MEMORIES
To recall saved memory settings, press
MR
so appears. Then
press or to select the desired memory location.
Press
MR
again to return to the VFO mode, (See “Selecting Fre-
quencies (Direct Tuning)” on Page 23.)
CLEARING A SINGLE MEMORY
Follow these steps to clear any single memory location.
1. Press
MR
. and the last used memory location
appear.
2. Repeatedly press or to select the desired memory
location.
3. Press
FUNC
+
MR
. The selected memory location and
flash.
4. Hold down
FUNC
for several seconds. The memory location
clears and
------
appears to confirm that the location is
empty.
5. Press
MR
to exit the memory mode.
Note:
To clear all memory locations, see “Resetting the HTX-
400” on Page 44.
MR
MR
MR
19-1104rc.fm Page 30 Friday, August 27, 1999 8:31 AM