Filter
Top Products
13
CONNECTING THE ANTENNA
Place the threaded base socket of the supplied antenna over the
antenna connector on top of the transceiver and turn the antenna
clockwise to tighten it
. Turn it clockwise to remove it.
Caution:
Do not over-tighten the antenna
Note:
You can connect an external antenna to the HTX-400 using
an SMA-to-PL-259 adapter. This adapter, as well as suitable an-
tennas, are available through your local RadioShack store.
ATTACHING THE BELT CLIP
Use a Phillips screwdriver and the two supplied screws to attach
the supplied belt clip to your transceiver. Do not overtighten the
screws.
U
19-1104rc.fm Page 13 Friday, August 27, 1999 8:31 AM