Filter
Top Products
14
ATS/MW
— selects the MW (medium wave) band and lets you select MW stations
using your receiver’s automatic tuning system.
METER/SW
—
selects the SW (shortwave) band, and lets you scan for a shortwave
frequency in one of the receiver’s 14 meter bands.
Number Keys — each key has a single-digit label and a band range. The single
digits are used to enter a channel, frequency, or ID number. The band range
(120m, for example) indicates the shortwave band you can tune by pressing that
key.
•
— enters a decimal point or clears an incorrect entry.
C
(cancel)
— cancels an entry.
F/FREQ
(frequency)
— lets you tune a frequency directly.
M/MEM
— stores frequencies into memory.
ENTER
— enters a frequency.
TIMER 1, TIMER 2, TIMER 3
— let you select any of the receiver’s three timers.
WORLD/HOME
— lets you select the time you want to display (world time or your
home time).
AM MODE
— lets you set up the alarm timer.
—
lets you lock out selected frequencies.
EDIT
— lets you assign a name for each FM, MW, or LW station or for each page
where you stored an SW station.
PAGE
— lets you select either of the receiver’s memory pages (see “Memory Func-
tions” on Page 27).
PRIORITY
— tunes to the priority station you set.
TUNING /
— tunes up or down the band you selected.
M