Filter
Top Products
5
SETTING THE CLOCK
After you connect power, flashes
on the display and the clock begins
to run.
Follow these steps to set the time.
1. Press and hold
TIME ADJ
.
appears.
2. While holding down
TIME ADJ
,
press
HR
to set the hour.
3. While holding down
TIME ADJ
,
press
MIN
to set the minute.
Notes:
• To advance the settings rap-
idly, press and hold
HR
or
MIN
.
•
PM
appears when the clock
displays a PM hour.
AM
appears when the clock dis-
plays an AM hour.
4. Release
TIME ADJ
. disap-
pears.
USING EARPHONES
You can use the built-in speaker to
listen to the radio. Or, you can use
stereo earphones (not supplied) with
a
1
/
8
-inch plug to listen in private.
Insert the earphones’
1
/
8
-inch plug
into the radio’s earphone jack.
Note:
The built-in speaker discon-
nects when you plug in earphones.
Listening Safely
To protect your hearing, follow these
guidelines when you use earphones.
• Set the volume to the lowest
setting before you begin listen-
ing. After you begin listening,
adjust the volume to a comfort-
able level.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to
permanent hearing loss.
• Once you set the volume, do
not increase it. Over time, your
ears adapt to the volume level,
so a volume level that does not
cause discomfort might still
damage your hearing.
SEC
ADJ
ADJ
20-225.fm Page 5 Wednesday, August 4, 1999 10:07 AM