Filter
Top Products
21
MOUNTING THE AMPLIFIER
Before you begin mounting the amplifier, make sure you have the following sup-
plied hardware necessary for mounting.
• 6 sheet-metal screws
• 6 spring washers
• 6 flat washers
Then confirm that the amplifier fits your vehicle’s mounting area.
Caution:
Be careful to not drill into anything behind the mounting surface
1. Temporarily disconnect your vehicle battery’s negative (
-
) cable again.
2. To make mounting more convenient, temporarily disconnect the amplifier’s
connections (ground, primary power, remote power, your vehicle stereo’s
input, and speakers).
12-1977.fm Page 21 Tuesday, July 13, 1999 10:07 AM