Filter
Top Products
16
Connecting Two Speakers (Unbridged Connection)
If you are connecting only two speakers, you can connect them to the amplifier’s
front (
CH1
and
CH2
) or rear (
CH3
and
CH4
) speaker terminals.
Caution
: This is an unbridged connection that produces 85 watts per channel. If
you do not have high power speakers, use this connection.
1. Connect one end of a speaker wire’s marked conductor to the amplifier’s
+
CH1
(front-left positive) or
+
CH3
(rear-left positive) terminal.
2. Connect the unmarked conductor’s end to the amplifier’s
CH1
−
(front-left
negative) or
CH3
−
(rear-left negative) terminal.
3. Repeat Steps 1 and 2 to connect speaker wires to the amplifier’s
CH2
+
and
−
CH2
(front-right) or
CH4
+
and
−
CH4
(rear-right) terminals.
4. Connect the other ends of the speaker wires so
CH1
(or
CH3)
connects to
the left speaker and
CH2
(or
CH4
)
connects to the right speaker.
12-1977.fm Page 16 Tuesday, July 13, 1999 10:07 AM