Filter
Top Products
9
USING QUIET CODES
Quiet Codes let you talk and listen to
other radios set to the same channel
and CTCSS (quiet code). This is similar
to having a sub-channel within a
channel, giving you greater
communication flexibility. When you set
a quiet code (there are 38 codes to
choose from) and turn on this feature,
you can communicate with any user
whohasaradiosettothesame
channel and quiet code.
1. Hold down
QUIET until the quiet
code flashes.
2. Repeatedly press
e/SCAN or
d/CALL until you see the desired
quietcode.(See“QuietCodes”on
Page 10 for a complete list of quiet
codes.) Ô
3. Press
QUIET to store the quiet
code.
4. To turn off the quiet code feature,
press
QUIET.Thequietcode
disappears.
Ô NOTE Ô
• To quickly find a
quiet code, hold
down d/CALL until
the desired quiet
code appears, then
release d/CALL.
• We recommend that
you select a quiet
code from the range
7–30. If you select a
code below or above
that range, you must
wait 1 to 2 seconds
after holding down
TALK before you
start talking.