Radio Shack 10 Disc CD Changer CD Player User Manual


 
19
Intro Scan
You can set the CD changer to play the
first 10 seconds of each track on the cur-
rent CD, to help you find the track you
want to hear.
Press
SCAN
to begin the scan. The dis-
play shows
SCN
and the track number
scanning.
To stop scanning and resume to play-
back, press
SCAN
again.
SCN
disap-
pears from the display.
Repeat Play
Press
REPEAT
.
RPT
appears and the
current track plays repeatedly.
Hold down
REPEAT
for three seconds or
more.
DISC
RPT
appears and the cur-
rent disc plays repeatedly.
Press
REPEAT
again to end repeat play.
Shuffle Play
Press
SHUFFLE
. SHUFF appears, and
the tracks on the current disc play in ran-
dom order. When all tracks on the cur-
rent disc have played, they play again in
a different order.
Hold down
SHUFFLE
for three seconds
or more.
DISC SHUFFLE appears and
all the tracks on a randomly-selected
disc are played in random order. When
all tracks on thst disc have played, all
the tracks on a different randomly-se-
lected disc play. This continues until all
tracks on all discs in the CD magazine
have played. Then shuffle play stops.
Press
SHUFFLE
again to end shuffle
play.
SWITCHING BETWEEN
THE CD PLAYER AND THE
RADIO
If you connected the Audio Adapter’s
antenna plug to your sound system’s an-
tenna jack and you want to listen to the
radio, turn off the CD changer, then tune
the radio to the station you want to hear.
Note:
If you do not stop or turn off the
CD changer, the CD continues to play
while you listen to the radio.
To return to the CD, tune the radio to the
same FM frequency as the
89.1 MHz/88-
7 MHz
setting on the FM modulator.
12-2182.fm Page 19 Friday, September 3, 1999 7:31 AM