QSC Audio WL 2102 Speaker User Manual


 
10
Preliminary System Specifications (subject to change without notice)
Configuration: Three way, biamp (active two way) or triamp (full three way active)
Frequency Response: 52Hz - 18KHz (+/- 3dB)
Sensitivity: biamp: 97dB (2.83v @ 1m)
triamp: 99dB (2.83v @ 1m)
Nominal coverage: Horizontal:140deg. Vertical: Dependant on number of elements used
Nominal Impedance: 8 ohms, low frequency in biamp mode, 16 ohms low frequency in triamp mode
16 ohms, high frequency
Transducers:
Low Frequency: two 10" (254mm) long excursion, high power, 3" (76mm) voice coil, 16 ohm, 380
watts rms each
High Frequency: 3.0” (76mm) diaphragm, 1.4" (36mm) exit, 16 ohm neodymium compression
driver on proprietary patent-pending waveguide, 80 watts rms
Recommended Amplifier Power: 300 watts high frequency
700 watts mid frequency triamp mode
700 watts low frequency triamp mode
1400 watts low/mid frequency in biamp mode
Enclosure:
Type: Bass reflex (ported), trapezoidal
Material: Cored Composite laminate
Finish: Black or white texture coat
Grille: Powder-coated steel
Connectors: two Neutrik NL8
Attachment points: Self contained rigging configuration. Each front receiver tubes contains a
captive articulated joint (knuckle) and two ball-lock pins on lanyards. Rear
mounting block has integral mounting link and one ball-lock pin on lanyard.
Weight: 70lbs, 31.8kg
Dimensions: 10.75" H x 27.5"W x 20.25"D
27.3cm H x 69.85cm W x 51.43cm D
Accessories
Array Frames: Small array frame- 8 enclosure maximum for flown (suspended) applications,
4 enclosure max. for stacking on I-215 sub cabinet (deck applications).
Frame weight 33lbs. / 15.0kg
Large Array Frame- 24 enclosure maximum for flown (suspended) applications, 12
enclosure max. for deck stacking.
Frame weight 84lbs. / 38.1kg
Software EASE Focus line array modeling software tool available; visit www.qscaudio.com or
contact QSC’s Technical Services for DSP files for both QSControl.net and Signal
Manager
Ball-lock Pins 5/16” dia. x 0.75” long, t-handle: p-n SR000052-00
5/16” dia. x 1.25” long, button-handle: p-n SR000081-00