Filter
Top Products
9
10
WL2102 WL2102-w
Configuration Bi-amp or tri-amp mode
Transducers
Low-frequency
High-frequency
2 x 400 W, 16Ω 10" woofer, 3" voice coil, ceramic magnet assembly
1.4" exit, 3" titanium diaphragm, neodymium magnet assembly
Frequency Response (±3 dB)
1
55 Hz – 18 kHz (with recommended DSP processing)
Frequency Range (-10 dB) 48 Hz – 20 kHz (with recommended DSP processing)
Nominal Impedance HF: 16Ω
LF bi-amp mode: 8Ω
LF tri-amp mode: 16Ω (x 2)
Continuous Power Capacity /
Recommended Power
HF: 80 W / 300 W (2 hours, AES1984-2 method, 1 – 10 kHz)
LF bi-amp mode: 600 W / 1400 W (2 hours, AES1984-2 method, 80 – 800 Hz)
LF tri-amp mode: 400 W / 700 W (x 2) (2 hours, AES1984-2 method, 80 – 800 Hz)
Sensitivity (1 W at 1 m) HF: 107.5 dB (single cabinet measured in free space)
LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)
Maximum Output
Continuous / Peak (SPL at 1 m)
HF: 127 dB / 133 dB
LF: 127 dB / 133 dB
Nominal Coverage H: 140°
V: dependent on number of elements used
Cabinet Type Ported / trapezoidal
Enclosure Material Cored composite Baltic birch plywood
Finish Black or white texture coat
Grille
Perforated, formed powder coated steel
Connectors 2 x Neutrik Speakon
®
NL8 in parallel
Pin Outs Pins Bi-Amp Tri-Amp
1+/1- LF MF
2+/2- NC LF
3+/3- NC NC
4+/4- HF HF
Attachment Points Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 0° – 10°
Weight (Net / Shipping) 70 lb (31.8 kg) / 78 lb (35.5 kg)
83 lb (37.7 kg) / 91 lb (41.4 kg)
Dimensions (HWD) 10.8" x 27.4" x 20.75" (274 mm x 696 mm x 527 mm)
Available Accessories
WL Small Grid
AF2102-LA
For suspended or stacking applications on QSC’s 215SB or 215 PCM subwoofer.
Frame used for suspending or stacking applications. Frame weight 37 lb/16.8 kg.
Software EASE Focus line array modeling software tool available; visit www.qscaudio.com or contact QSC’s Technical Services for
DSP files for both QSControl.net and Signal Manager
Ball-lock Pins
WL2102
WL2102-w
AF2102-LA
WL SMALL GRID
Nylon Lanyard 5/16" D x 0.75" H, t-handle: p-n SR-000052-00 (Rear link and Front tube pin)
7" Stainless steel lanyard 5/16" D x 0.75" W, t-handle: p-n HW-000106-00 (Rear link pin)
5" Stainless steel lanyard 5/16" D x 0.75" W, t-handle: p-n HW-000126-00 (Front link pin)
4" Stainless steel lanyard 5/16" D x 1.25" W, Round head HW-000162-00 (Rear link pin)
9" Stainless steel lanyard 5/16" D x 1.25" W, Round head. HW-000163-00 (Rear link pin)
1) With recommended DSP settings
Specifications subject to change without notice.
Specifications