Filter
Top Products
17- If the NAC-100 does not show in the Inventory, check the cable connections, verify IP addresses are set correctly, verify
Subnet masks are set correctly, and verify PoE is properly applied to the NAC-100.
18- Double-Click on the NAC-100 in the Inventory. A view of applicable options will open.
19- Click on Help to access the software’s Help system. All software operation is covered in the on-line help file.
Operation of the NAC-100 is accomplished with the included QSControl.net Venue
Manager software. No software operation is covered in this hardware manual. After
installing your software, open the Help file and follow its recommendations. The
software Help file includes the most recent information available for your NAC-100.