PYLE Audio PT-669D Cassette Player User Manual


 
Panel Information
DECK A PLAYBACK
ON/STANDBY
POWER
PLAY CrO2
DUBBING
HI.SP.DUBBING
REC CrO2
REC LEVEL
MIN MAX
REC/PLAYBACK BECK B
DECK B
COUNTER
2 3 4 2
675891016
1. ON/STANDBY SWITCH
Press button to switch “ON” the unit and press again to switch
“OFF” unit into “STANDBY MODE”. If the unit is left unattended
for long period, remove the plug from the power socket.
2. CASSETTE HOLDER
3. PEAK LEVEL INDICATOR
These indicate the recording level during recording and output
level during playback. The LED indication varies with the signal
strength during recording and playback.
* HIGH SPEED
This lights when in the high- speed dubbing.
* DYNAMIC NR
When you need the Dynamic noise reduction, push the level
switch to the left.
* PLAY CrO2/ METAL
This lights when the CrO2/metal function is operated.
* REC CrO2
This lights when CrO2 function is operated.
4. TAPE COUNTER AND RESET BUTTON (DECK B)
When recording or playing, you can use the tape counter to count
the tape length.
5. REC LEVEL SWITCH
Adjust the record level.
6. CASSETTE OPERATION BUTTONS
REC
This lights when deck B is in the recording the record-pause
mode.
(play): Press to play the tape.
(rewind): Press to rewind the tape
(fast forward):
Press to fast forward the tape.
(stop/eject)
Press to stop the tape. Pressing this button after the tape
stops opens the cassette holder.
(pause):
Press to temporarily stop the tape in the record or playback
mode. Press it again to release the pause mode and restart
the tape.
7. REC CrO2 SWITCH
For recording with CrO2 tape.
8. HIGH SPEED DUBBING SWITCH
When you need dubbing, press this switch and the relative light
will be lit.
9. DUBBING SWITCH
Press the DUBBING switch to get set for further record functions
meanwhile relative light will be indicated.
10. PLAY CrO2/METAL SWITCH
Set these switches to NORM when using normal tape, to CrO2
when using chrome tape, and to METAL when using metal tape.