Filter
Top Products
Precautions
Thank you for purchasing this product. Taking time to read these
operating instructions carefully before use will acquaint you fully
with all its features and help ensure optimum performance.
In order to simplify the explanation illustrations may
sometimes differ from the originals.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, within an
equilateral, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARMING: To prevent fire or shock hazard, do not expose this
appliance to rain or moisture
Power plug
When disconnecting the power cord from the power
outlet, always take hold of the plug, and not the wire,
and pull free. Never connect or disconnect the power
plug with wet hands since you may receive an electric
shock.
Remember to disconnect the power plug from the power
outlet when you do not intend to use the unit for a
prolonged period of time.
Do not remove the case and bottom panel
Any inspections or adjustments inside the unit may lead
to malfunctions and electric shocks. Do not touch any of
the inside parts.
Do not block the ventilation holes
Do not block the ventilation holes on the top of the unit
by placing records or other objects over them. This will
increase the inside temperature may lead to a failure or
malfunction.
Installation precautions
Do not install the unit in any of the following locations
since this may result in deterioration in performance of
malfunction:
* Locations exposed to direct sunlight or near objects radiating
heat such as heating appliances.
* Locations exposed to moisture or humidity.
* Locations with poor ventilation exposed to dust and dirt.
* Locations which are unstable and not perfectly flat or which are
susceptible to vibration.
Do not wipe with thinners
Wipe the panels and case from time to time with a soft
cloth. Using any kind of thinner, alcohol or volatile
liquid will mar the surface, cause blotching on the
exterior and erase the markings and should therefore
be avoided. Do not use insecticide sprays in the
vicinity.
Dripping warning: The product shall not be exposed to dripping
or splashing and that no objects filled with liquids, such as vases,
shall be placed on the product.