Filter
Top Products
4 – PYLE PRO PDSP850 Owner’s Manual PYLE PRO PDSP850 Owner’s Manual -5
PYLE PRO Audio, Inc.
1600 63rd Street
Brooklyn, NY 11204
Place
Stamp
Here
Please complete warranty card, detach and return
All PYLE PRO products are carefully constructed and tested before shipment.
Units purchased in the USA are warranted to be free of defects in material
and workmanship for two (2) years from the date of purchase. This warranty
is limited to the original retail purchaser of the amplifier.
Should the unit fail due to factory defects in material or workmanship, your
unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline
at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must
appear on the outside of your package and on all paperwork relating to your
return.
When returning the unit to us for warranty service, it must be carefully packed
and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing with the
product
• Include in your letter your return address, daytime phone number and
R.A. number
• Also include a check or money order for $15.00 for return shipping,
handling and insurance, or provide your Visa/MC number with
expiration date.
Our obligation under this warranty is limited to the repair or replacement of
the defective unit when it is returned to us prepaid. This warranty will be
considered void if the unit was tampered with, improperly serviced or subject
to misuse, neglect or accidental damage.
Limited Warranty
3.The SAMPLER LEVEL control
To adjust the level of the sample playback as it enters the mix,
rotate the SAMPLER LEVEL to increase or decrease the level.
4.The SAMPLER PAN control
To adjust the balance of the sample playback as it enters the mix,
set the control in the center position to playback the sample
evenly through the left and right channel. Turning the SAMPLER
PAN control to left or right will move the playback sample similar
to a balance control.
5.The PITCH control
To adjust the speed of the playback signal.
Set the control to the center position and record the sample,
to get a perfect sample. During the playback, rotate the PITCH
control to reduce or increase the pitch of the sample, set to the
center for a normal pitch.
PDSP850 Specifications
Input Sensitivity/Impedance
Mic
Line
Phono
Output Level
Mic
Line
Rec
Frequency Response
S/N Ratio
Mic
Line
Phono
Distortion
Mic
Line
Phono
Sampling Length(ADPCM)
Pitch Changer
Power Source
Dimensions(HxWxD)
(mm)
Weight, LBS(kg)
1.5mV/600 Ohms
150mV/27k Ohms
3.0mV/47k Ohms
1.5mV/600 Ohms
1.0V/1k Ohms
100mV/1k Ohms
20Hz to 20k Hz (+/-3dB)
>60dB
>80dB
>70dB
<0.2%
<0.02%
<0.08%
4sec X 1 16sec X 1
8sec X 2 24sec X 1
12sec X 1
+/- 1/2 Octave
115VAc, 60Hz/230VAc, 50 Hz
1
3/4" x19"x6"
(44 x 482 x 153)
4.18(1.9)