Filter
Top Products
9
• AUTOMATICALLY MEMORY
STORING & PROGRAM SCANNING
- Automatic Memory Storing
Press AMS button (18) for several
seconds, the radio searches from
the current frequency and checks
the signal strength level until one
cycle search is finished.
And then 6 strongest stations are
stored into the corresponding preset
number button.
- Program Scanning
Press AMS button (18) shortly to
scan the preset station. When the
field strength level is more than the
threshold level of stop level, the radio
is holding at that preset number for
several seconds with releasing mute,
then searches again.
• STATION STORING
Press any one of the preset buttons
(14) (M1 to M6) to select a station
which had been stored in the memory.
Press this button for several seconds,
current station is stored into the
number button.
OPERATION
RADIO OPERATION
• BAND SELECTION
At tuner mode, press LOU/BND button
(13) shortly to select the desired band.
The reception band will change in the
following order:
• STATION SELECTION
Press MANU/SKIP button (16) or
MANU/SKIP button (17) shortly to
activate automatic seek function.
Press for several seconds until
“MANUAL” appeared on the display,
the manual tuning mode is selected.
If both buttons have not pressed for
several seconds, they will return to
seek tuning mode and “AUTO”
appeared on the display.
• LOCAL/DISTANCE
Press LOC button (3) to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations.
• MONO/STEREO
Press MON button (1) to select mono
or stereo mode. You can sometimes
improve reception of distant stations
by selecting mono operation.
• SCAN
Press SCN button (24) to set function
to scan mode, which scanning to
higher frequency station with
receivable signal and keep on each
station for several seconds.
FM1 FM2 FM3 AM