Plinius Audio SA-250 Stereo Amplifier User Manual


 
19
Your Plinius SA-250 Power Amplifier is designed for use with high fidelity loudspeakers. It should not be
used to operate any other type of appliance or equipment.
Choice of loudspeakers is one of personal taste, providing the chosen loudspeakers are suitable for use
with your amplifier. Be certain that your loudspeakers can handle most of the rated output power of this
amplifier. You may find loudspeaker specifications confusing or misleading so you should discuss this
with your audio dealer prior to purchase. As a general rule, the use of high power (200 watt RMS or
greater) loudspeakers is recommended and desirable. However, our experience indicates that medium to
low power loudspeakers (100 to 200 watt RMS) are quite often suitable for use on this amplifier provided
the volume is maintained at a level where no distortion is audible.
Impedance of the loudspeaker load is important to ensure the rated performance of this amplifier. Any
combination of loudspeakers may be used but the total average impedance load for each channel should
be within a range of 4 to 8 ohms. Again, if you have doubts about the impedance of your loudspeaker
configuration, we recommend you speak to your PLINIUS
PLINIUSPLINIUS
PLINIUS dealer.