Plinius Audio 8100 Stereo Amplifier User Manual


 
7
RECORD SELECTOR
This rotary switch allows recording of any of the six different inputs available on the back panel. Note that
when recording, the source that is being listened to will not be interfered with. For example, it is possible
to be listening to the CD input whilst recording from the TUNER input. Two tape decks can be connected
and dubbing in either direction is possible.
VOLUME CONTROL KNOB
The volume control is an ALPS motorised unit that will accurately convey the source signals to the power
amplification stage of the Plinius 8100. The knob can be adjusted manually or with the remote control
supplied. When using the remote control to alter the volume level, stab the button to make small
adjustments, or hold the button down to continuously adjust the volume.
MUTE/REMOTE LED
The LED directly below the volume knob serves two purposes. Firstly, whenever the Plinius 8100 is in
mute, the LED will be lit. Secondly, whenever a button on the remote control is used, the LED will light to
show the amplifier is receiving signal.