Filter
Top Products
Battery storage time
If you remove a fully charged battery from the headset, it will provide up to 75 days of battery
storage time, stored under normal conditions.
Talk time
With a single full charge, the headset will provide up to 7 hours of continual talk time. Talk time
will be reduced when operating in wideband mode and/or if the headset is used consistently at
a long distance from the base. You can replace the battery mid-call without losing the call as
long as a charged battery is re-attached within 5 minutes. This allows for unlimited talk time.
Power consumption
Once the headset battery is fully charged the product enters a networked standby mode. The
period of time taken to enter this mode depends on how long the battery takes to fully charge.
In a networked standby mode the product consumes 2.0 Watts.
The wireless network port(s) of this product are designed to be always active.
Replace your headset battery
The spare headset battery is located in a battery compartment on the side of the charging
cradle. As the battery is hot-swappable, you won't lose a call if you replace the battery within
five minutes.
1
Open the battery compartment door on the side of the charging cradle and remove the battery.
2
Disconnect the battery from the headset.
3
Slide the charged battery onto the headset until you hear a click.
4
Charge the used battery by placing it in the battery compartment and closing the door. The
spare battery charging LED will flash green until the battery is charged and will remain solid
green when fully charged.
20