Plantronics HL10 Headphones User Manual


 
Plantronics Savi User Guide
8
3 Headset Set Up
3.1 Fitting Headset
The headset comes with a pre-installed eartip. To install a different
eartip see the following:
1 Remove the pre-installed eartip by pushing in and
turning the eartip CLOCKwise, then pull firmly.
2 Choose the size and style of eartip that fits most
comfortably. Align eartip tabs with notches in headset.
Push in firmly and twist COUNTER clockwise.
3 Slide the headset over and behind your ear, then press
gently toward your ear.
4 Rotate the microphone boom until it is pointed toward
your mouth.
5 The headset can be converted for wearing on left ear as
follows:
a. Rotate the microphone boom up.
b. Turn microphone boom around.
c. Rotate microphone boom down.
3.2 Docking and Charging the Headset
1 Gently push the headset into the charge cradle.
The charging indicator light on the base will flash green to
indicate that the headset battery is charging.
2 Charge for at least 20 minutes prior to the first use.
A full charge takes 3 hours. The indicator light will turn solid
green.
CHARGING TIME
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
Charging
Indicator Light
NOTE When installing a gel tip ensure the raised part of the
eartip is pointed toward the curved section of the headset as
shown.