3
IMPORTANT SAFETY INSTRUCTIONS
8. Do not allow anything to rest on the power cord. Do
not locate this product where the cord will be abused by persons
walking on it.
9. Do not overload outlets and extension cords as this can
result in the risk of fire or electric shock.
10. Never push objects of any kind into this product
through base unit slots as they may touch dangerous voltage
points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassem-
ble this product, but take it to qualified service personnel when
service or repair work is required. Opening or removing covers
may expose you to dangerous voltages or other risks. Incorrect
re-assembly can cause electric shock when the product is subse-
quently used.
12. Avoid using telephone equipment during an electrical
storm. The CT10 System has built-in surge protection circuits that
meet or exceed FCC requirements. However, an incident such as a
lightning strike at or near the telephone lines, could cause serious
damage. There may also be a remote risk of electric shock or dam-
age from lightning. If the CT10 System is installed in an area with
frequent and/or severe electrical storms, it is suggested that the
telephone be disconnected during these storms or that additional
surge suppression equipment be added to the installation.
13. Do not use the telephone equipment to report a gas
leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
ENGLISH FRANÇAIS ESPAN
˜
OL PORTUGUE
ˆ
S KOREAN JAPANESE CHINESE