Filter
Top Products
14
THE REMOTE DOES NOT RING
Make sure that the Ringer is “On”.
Ensure that the Telephone Cord and the AC Adapter
are installed correctly.
Recharge the Remote Battery by firmly placing it in the
Remote Charging Well .
Disconnect the AC Adapter from the power source and
reconnect it in a known good outlet.
Use the Remote in an area closer to the Base .
I CANNOT HEAR A DIAL TONE
Make sure your Remote Rechargeable Battery is
securely seated in the Charging Well and/or fully
charged. The Battery may need to be charged for 8
hours prior to first use.
Check that all cords are correctly connected and firmly in
place.
Adjust the Dual Function Receive Volume Control Key
up to increase the volume.
Make sure the Remote is within range of the Base.
Separate and then reconnect the Rechargeable Battery
and Remote .
Return the Remote to the Charging Well for 5 seconds
to re-establish a communication link.
TROUBLESHOOTING
A
E
G
C
A
E
G
E