Pioneer XV-DV180 Home Theater System User Manual


 
Other connections 11
43
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Remote control operation
The remote control supplied with this system
allows you to play and stop media, and perform
other operations.
1
Connecting Optional
Bluetooth
ADAPTER
1 Switch the system into standby and
connect
Bluetooth
ADAPTER to the
ADAPTER
PORT
located in the rear panel.
For the connection diagram, see 5 on page 40.
2Press
STANDBY/ON
.
3Press
ADAPTER PORT
and to switch to
BT
AUDIO
input mode.
2
Pairing
Bluetooth
ADAPTER and
Bluetooth
wireless technology
device
“Pairing” must be done before you start
playback of Bluetooth wireless technology
content using Bluetooth ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
“Pairing” is the step necessary to register
Bluetooth wireless technology device to enable
Bluetooth communications.
3
For more details,
see also the operating instructions of your
Bluetooth wireless technology device.
1Press
SHIFT+SETUP
to select
BT SETUP
,
then press
ENTER
.
2Use
/
to select
PAIRING
, then press
ENTER
.
3 Select the PIN code to be used from 0000/
1234/8888 using
/
, then press ENTER.
PAIRING blinks.
CAUTION
You can use any of 0000/1234/8888 PIN
codes. Bluetooth wireless technology
device using any other PIN code cannot be
used with this system.
4 Switch on the
Bluetooth
wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
Note
1 • It may be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles.
• Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.
Music data
This unit
Bluetooth
®
ADAPTER
Remote control operation
Bluetooth
wireless
technology
enabled device:
cell phone
Bluetooth wireless
technology
enabled device:
Digital music
player
Device not
equipped with
Bluetooth wireless
technology:
Digital music
player
+
Bluetooth audio
transmitter
(sold commercially)
2 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT, BT AUDIO input mode cannot be entered even if
ADAPTER PORT is pressed.
3 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology
device.
HTZ180_181_280_282DVD_En.book 43 ページ 2009年3月13日 金曜日 午後2時50分