Filter
Top Products
Listening to your system 03
15
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Chapter 3
Listening to your system
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
• Press
SURROUND
to select the AUTO
listening mode.
1
Listening in surround sound
You can listen to stereo or multichannel
sources in surround sound.
2
Surround sound
is generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
• Press
SURROUND
repeatedly to select a
listening mode.
1
The choices that appear in the display will vary
according to the type of source that’s playing.
• AUTO – Auto listening mode (see above)
• DOLBY PL (Dolby Pro Logic) – 4.1 channel
surround sound (use with any two-channel
source)
• MOVIE (Dolby Pro Logic II Movie) – Pro
Logic II 5.1 channel surround sound,
especially suited to movie sources (use
with any two-channel source)
• MUSIC (Dolby Pro Logic II Music) – Pro
Logic II 5.1 channel surround sound,
especially suited to music sources (use
with any two-channel source)
• STEREO – See Listening in stereo below
Using Front Surround
HTZ161DVD only
The Front Surround mode is effective when
DVD/CD or USB is selected as the input
source and you are using the Front surround
3-spot speaker setup as described in Home
theater sound setup on page 10 and the
Speaker Setup Guide.
• The surround speakers should be placed
on top of the front speakers and oriented
towards the walls.
1 Press SETUP and use
/
to choose
F.SURR
then press ENTER.
3
2Use to
/
select MODE ON or MODE
OFF then press ENTER.
4
After selecting MODE ON, you can use the
surround listening modes with Front
Surround.
Note
1 If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.
2 Note that the input source must be switched to DVD/CD or USB for multichannel playback.
3 Note that the F.SURR option does not appear when headphones are connected.
4 • When set to MODE ON, make sure to follow the Setup Guide for best surround sound.
• When you have Extra Power set to MODE ON and then change Front Surround to MODE OFF, the Listening Mode is
automatically switched to AUTO.
Home_theater.fm 15 ページ ２００７年２月２２日 木曜日 午前１０時０分