Filter
Top Products
Playing sources05
34
En
Selecting the multi-channel
analog inputs
Connect a DVD player with 5.1 channel output
to listen to 5.1 channel playback.
1 Select DVD/LD if it is not already
selected.
Use the INPUT SELECTOR (VSX-D412)/MULTI
CONTROL (VSX-D512) buttons on the remote
(or the MULTI JOG/INPUT SELECTOR dial on
the front panel).
2 Press SIGNAL SELECT (front panel)
repeatedly to select DVD 5.1 ch.
To cancel 5.1 channel playback, use the SIGNAL
SELECT button to select an input signal (other
than DVD 5.1 ch).
• When 5.1 channel playback is selected,
you can’t use the SIGNAL SELECT, INPUT
ATT, TONE, and MIDNIGHT/LOUDNESS
buttons, as well as the Standard, Advanced
Surround, and Stereo/Direct sound modes.
• When 5.1 channel playback is selected,
only the volume and channel levels can be
set.