Filter
Top Products
Controls and displays04
28
En
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO : Lights when AUTO signal select is on.
DIGITAL : Lights when a digital audio signal is
detected.
2 DIGITAL : Lights when a Dolby Digital signal
is detected.
ANALOG : Lights when an analog signal is
detected.
DTS : Lights when a source with DTS audio
signal is detected.
2 DTS
When the Standard mode of the receiver is on,
this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on,
this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on,
this lights to indicate Prologic II decoding.
5ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the input signal (can only
be used with an analog signal).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls and
channel levels for the most accurate reproduc-
tion of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected.
9 Speaker indicator
Shows if the speaker system is on or not.
SP 3A means speakers are switched on. SP 3
means the headphones are connected.
10 Character display
11 ADV. SURR. (Advanced Surround)
Lights when one of the Advanced Surround
listening modes of the receiver is selected.
dB
SIGNAL
DIGITAL DIGITAL
ANALOGDTS
DIGITAL ATT
DIRECT
MIDNIGHT
LOUDNESS
MONO
SP A
STEREO
TUNED
MONITOR
PROLOGIC
ADV.SURR.
AUTO
1
2
3
4
5
6
78
9
10
14
12
11 13
Display