Filter
Top Products
Other connections
08
56
En
Using the multi-room controls
The following steps use the front panel controls to adjust
the sub room volume and select sources. See
Multi-room
remote controls
below
1 Press the MULTI ROOM & SOURCE ON/OFF button
on the front panel.
Each press selects a multi-room option:
•
ROOM 2 ON
– Selects your primary (
ROOM 2
) sub
room.
•
ROOM 2&3 ON
– Select both sub rooms.
•
ROOM 3 ON
– Selects your secondary (
ROOM 3
)
sub room.
•
Off
– Switches the multi-room feature off
The
MULTI ROOM
indicator lights when the multi-room
control has been switched on.
2 Press CONTROL to select the sub room(s) you want.
1
If you selected
ROOM 2&3 ON
above, you can toggle
between
ROOM 2
and
ROOM 3
.
• When the receiver is on,
2
make sure that any
operations for the sub room are done while
ZONE
and your selected sub room(s) show in the display. If
this is not showing, the front panel controls affect the
main room only.
3 Use the
INPUT SELECTOR
dial to select the source
for the room you have selected.
For example,
ROOM 2 CD-R
sends the source connected
to the
CD-R
inputs to the primary (
ROOM 2
) sub room.
• If you select
TUNER
, you can use the front panel
TUNER
controls to select a preset station (see
Saving
station presets
on page 30 if you’re unsure how to do
this).
3
4 Use the
MASTER VOLUME
dial to adjust the
volume.
This is only possible if you selected the
VARIABLE
volume control in
Multi-Room and IR receiver setup
on
page 62.
4
5 When you’re finished, press CONTROL again to
return to the main room controls.
You can also press the
MULTI ROOM & SOURCE ON/
OFF
button on the front panel to switch off all output to
the sub room(s).
5
Multi-room remote controls
The following table shows the possible multi-room
remote controls:
Connecting an IR receiver
If you keep your stereo components in a closed cabinet or
shelving unit, you can use an optional IR receiver (such
as a Niles or Xantech unit) to control your system instead
of the remote sensor on the front panel of this receiver.
6
You may need to specify your IR receiver type in
Multi-
Room and IR receiver setup
on page 62.
Note
1 Note that when recording, this also selects the
RECOUT
input source. See
Making an audio or a video recording
on page 64 for more on this.
2 If the receiver is in standby, the display is dimmed, and
ZONE
and your selected sub room(s) continue to show in the display.
SPEAKERS
(TUNE +)
ENTER
(TUNE –)
PHONES
AV
PARAMETER
SETUP
(ST –) (ST +)
TUNER
EDIT
BAND
CONTROL ON/OFF
VIDEO
SELECT
SIGNAL
SELECT
SBch
PROCESSING
STEREO
VIDEO/GAME 2 INPUT
DIGITAL IN S-VIDEO VIDEO L RAUDIO
MULTI – ROOM &
SOURCE/REC SEL
MCACC
SETUP MIC
RETURN
STANDBY/ON
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-AX4AVi
PHASE
CONTROL
PHASE
CONTROL
MCACC
POSITION
AUTO SURR/
STREAM DIRECT
DIGITAL PRECISION
PROCESSING
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND
INPUT
SELECTOR
MASTER
VOLUME
3 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one room also changes the station in the other room.
Please be careful not to change stations when recording a radio broadcast.
4 The volume levels of the main and sub rooms are independent.
5• You won’t be able to switch the main room off completely unless you’ve switched off the multi-room control first.
• If you don’t plan to use the multi-room feature for awhile, turn off the power in both the sub and main rooms so that this receiver is in standby.
Button
What it does
SHIFT
+
RECEIVER
Selects the sub room you want to control,
shown in the display as
RCV/RM2
(
ZONE
/
ROOM2
) or
RCV/RM3
(
ZONE
/
ROOM3
).
Switches on/off power in the currently selected
sub room.
INPUT
SELECT
Use to select the input source in the currently
selected sub room.
Input
source
buttons
Use to select the input source directly (this may
not work for some functions) in the currently
selected sub room.
VOL +/–
Use to set the listening volume in the currently
selected sub room (
ZONE
/
ROOM2
only).
6• Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.
• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check for IR compatibility.
• If using two remote controls (at the same time), the IR receiver’s remote sensor takes priority over the remote sensor on the front panel.
VSX_AX4AVi.book.fm 56 ページ ２００５年６月２０日 月曜日 午後６時２７分