Pioneer VSX-91TXH Stereo System User Manual


 
19
Displaying reverb characteristics after calibration
To display the graph of your listening areas reverb characteristics with the equalization performed by this
receiver (after calibration), youll need to select the EQ ON option from the Reverb Measurement menu.
Using this graph, you can confirm the effects of MCACC calibration for your listening area.
1 Connect the receiver to your PC with a RS-232C cable.
See page 5 for more on connecting the RS-232C cable.
2 Make sure you have completed the Auto MCACC setup from the receivers
System Setup menu.
Use either the ALL or ALL (Keep SPsetting) Auto Mode option (Aco Cal EQ Pro. calibration is also
performed in this case).
3 Select Reverb Output PC from the receivers EQ Professional menu.
When you receive and save this information on your PC, you will be able to see the graph of your
listening areas reverb characteristics before calibration.
4 Select Reverb Measurement from the receivers EQ Professional menu and
choose the EQ ON option as explained on page 41 of the receivers manual.
The EQ measurement will correspond with the currently selected MCACC preset (M16).
5 Select Reverb Output PC from the receivers EQ Professional menu.
When you receive and save this information on your PC, you will be able to see the graph of your
listening areas reverb characteristics with the equalization performed by this receiver (after calibration).
The following graph shows the reverb measurement results
after
Aco Cal EQ Pro. calibration (with a
time period setting of 20-40ms):
Notes
•“Reverb Measurement calibration data will be lost if the power is switched off.
The graphs displaying reverb measurements both before and after calibration are displayed in 2-D for
comparison purposes.
How to Interpret the Graphs (Continued)