Filter
Top Products
95
En
FM Tuner Section
Frequency Range ......................... 87.5 MHz to 108 MHz
Usable Sensitivity...... Mono: 15.2 dBf, IHF (1.6 µV/75 Ω)
50 dB Quieting Sensitivity.......................Mono: 20.2 dBf
Stereo: 41.2 dBf
Sensitivity (DIN) ......................Mono: 1.1 µV (S/N 26 dB)
Stereo: 50 µV (S/N 46 dB)
Signal-to-Noise Ratio ................. Mono: 76 dB (at 85 dBf)
Stereo: 72 dB (at 85 dBf)
Signal-to-Noise Ratio (DIN)..........................Mono: 62 dB
Stereo: 58 dB
Distortion ...................................... Stereo: 0.6 % (1 kHz)
Alternate Channel Selectivity ................. 70 dB (400 kHz)
Stereo Separation ...................................... 40 dB (1 kHz)
Frequency Response ................ 30 Hz to 15 kHz (± 1dB)
Antenna Input .......................................75 Ω unbalanced
AM Tuner Section
Frequency Range .......................... 531 kHz to 1.602 kHz
Sensitivity (IHF, Loop antenna)......................... 350 µV/m
Selectivity............................................................... 30 dB
Signal-to-Noise Ratio .............................................. 50 dB
Antenna......................................................Loop antenna
Miscellaneous
Power Requirements
UK model ......................................AC 230 V, 50/60 Hz
European model ...................AC 220 - 230 V, 50/60 Hz
Power Consumption ............................................. 400 W
Power Consumption in Standby mode .................. 1.0 W
AC Outlets (except for the UK model)
SWITCHED (×2)...............................Total 100 W MAX.
UNSWITCHED ........................................ 100 W MAX.
Dimensions .................. 420 (W) × 173 (H) × 470 (D) mm
Weight (without package) ....................................16.2 kg
Furnished Parts
FM wire antenna ............................................................1
AM loop antenna............................................................1
“AA” IEC LR6 batteries .................................................2
Remote control unit .......................................................1
Operating Instructions ...................................................1
NOTE:
Specifications and the design are subject to possible
modifications without notice, due to improvements.
Amplifier Section
Continuous Power Output (STEREO MODE)
FRONT .... 110 W + 110 W (DIN 1 kHz, THD 1 %, 8Ω)
Continuous Power Output (SURROUND MODE)
FRONT .... 110 W + 110 W (DIN 1 kHz, THD 1 %, 8Ω)
CENTER ................. 110 W (DIN 1 kHz, THD 1 %, 8Ω)
SURROUND ....................................... 110 W + 110 W
(DIN 1 kHz, THD 1 %, 8Ω)
Rated Power Output .............................. 100 W + 100 W
(20 Hz to 20 kHz, THD 0.09 %, 8Ω)
•
Above specifications are applicable when the power
supply is 230V.
Audio Section
Input (Sensitivity/Impedance)
PHONO MM ..........................................4.7 mV/47 kΩ
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
MD/TAPE 1/CD-R, TAPE 2.....................335 mV/47 kΩ
Frequency Response
PHONO MM ........................ 20 Hz to 20 kHz ±0.3 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
MD/TAPE 1/CD-R, TAPE 2.....5 Hz to 100,000 Hz dB
Output (Level/Impedance)
VCR 1/DVR REC, VCR 2 REC, MD/TAPE 1/CD-R REC,
TAPE 2 REC............................................335 mV/1 k Ω
Tone Control
BASS ...................................................± 6 dB (100 Hz)
TREBLE ...............................................± 6 dB (10 kHz)
LOUDNESS ........................... +10 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio (IHF, short circuited, A network)
PHONO MM ...................................................... 80 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
MD/TAPE 1/CD-R, TAPE 2................................ 101 dB
Signal-to-Noise Ratio [DIN Rated/50mW]
PHONO MM ................................................. 68/61 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
MD/TAPE 1/CD-R, TAPE 2............................. 92/65 dB
Phono Overload Level (T.H.D. 0.1%, 1 kHz)
PHONO MM ................................................... 120 mV
Video Section
Input (Sensitivity/Impedance)........................1 Vp-p/75 Ω
Output (Level/Impedance) ............................1 Vp-p/75 Ω
Signal-to-Noise Ratio .............................................. 65 dB
Frequency Response ..................... 5 Hz to 10 MHz dB
Component Video Section
Input (Sensitivity) ..........................................1 Vp-p/75 Ω
Output (Level/Impedance) ............................1 Vp-p/75 Ω
Signal-to-Noise Ratio .............................................. 65 dB
Specifications
+0
–3
+0
–3