Filter
Top Products
OPERATION
59
En
Memorizing a broadcast station name (Manual Station Name Memory)
• You can input a name of up to four characters for each preset broadcast station (see pages 57).
• The memorized name takes priority over PS data.
1 Select the TUNER function.
2 Press the CLASS button repeatedly to select
a class.
CLASS A CLASS B CLASS C
3 Press the STATION +/– buttons to select the
preset channel.
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
STEREO
TUNED
VOLUME
4 Press the CHARACTER/SEARCH button to
select the character input mode.
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
STEREO
TUNED
VOLUME
When FM is selected:
INPUT
(Character input mode)
OFFSEARCH
5 Press the TUNING +/– buttons to enter the
broadcast station name.
dB
STEREO
SIGNAL
SELECT
ANALOG
SP
A
STEREO
TUNED
VOLUME
Refer to “Character display used for station name input” on
p.87.
6 Press MEMORY to input the first of four
characters. After four characters have been
entered, the character input mode is exited.
Repeat steps 2 to 4 to memorize up to 30 broadcast station
names.
* When it is set to OFF,
frequency being received
will be displayed.
To erase and change the memorized station name
Perform the procedures of “Memorizing a broadcast station name” and enter four spaces to erase the
memorized station name.
When you want to change a memorized station name, input the new station name using the same procedure.
For greater convenience, record memorized station names in the STATION CALL button “memo” on
p.87.
When AM is selected:
INPUT
(Character input mode)
OFF
32 1
4
5
6
memo
memo
Using the Tuner