Filter
Top Products
Connecting your equipment
2
2
14
4
34
6
Connecting a TV and playback components
Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped component
(Blu-ray Disc player, etc.), you can connect it to this receiver
using a commercially available HDMI cable.
•
The following connection/setting is required to listen to the
sound of the TV over this receiver.
-
If the TV does not support the HDMI Audio Return
Channel function, connect the receiver and TV with audio
cables (as shown).
-
If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via
the HDMI terminal, so there is no need to connect an
audio cable. In this case, set ARC at HDMI Setup to ON
(see The HDMI Setup menu
on page 33).
Important
•
If the receiver is connected to a TV using an HDMI cable,
the on-screen display (OSD) will not be displayed. Be sure
to use a standard RCA analog video cable to connect. In
this case, switch the TV input to analog to see the OSD
screen (for setup, etc.) on the TV.
•
When the ARC function is ON and the receiver is
connected to a compatible TV with an HDMI cable, and you
switch the input of the TV to composite, the input of the
receiver may automatically switch to TV. If this happens,
switch the receiver’s input back to the original input, or turn
OFF the ARC function (see The HDMI Setup menu
on
page 33).
Note
•
In order to listen to the audio from the TV that is connected
to this receiver using an analog audio cables, set-up for
analog audio input is required (see The Input Assign menu
on page 32).
BD IN
ANALOG
IN1 (CD)
HDMI OUT
HDMI IN
VIDEO IN
DIGITAL AUDIO OUT
OPTICAL
HDMI OUT HDMI OUT
SAT/CBL IN
DVD IN
GAME IN
RL
ANALOG AUDIO OUT
OPTICAL
IN1 (TV)
MONITOR
OUT
HDMI
OUT
Select one
HDMI/DVI-compatible TV
This connection is
necessary in order to
see the OSD of the
unit on the TV.
Set-top box
DVD player,
HDD/DVD recorder
Blu-ray Disc player,
Blu-ray Disc recorder
Game console
HDMI/DVI-compatible components
If the TV does not support
the HDMI Audio Return
Channel function, this
connection is required to
listen to the TV sound over
the receiver.
VSX-523_UCSMXCN_En_New.book 14 ページ ２０１２年１２月１２日 水曜日 午後３時７分