Filter
Top Products
Listening to your system05
30
En
Using Front Stage Surround
Advance
The Front Stage Surround Advance function
allows you to create natural surround sound
effects using just the front speakers and the
subwoofer.
• While listening to a source, press
STEREO/
A.L.C.
to select Front Stage Surround Advance
modes.
• STEREO – See Listening in stereo on
page 29 for more on this.
• A.L.C. – See Listening in stereo on page 29
for more on this.
• F.S.S.ADVANCE – Use to provide a rich
surround sound effect directed to the
center of where the front left and right
speakers sound projection area converges.
Using Stream Direct
Use the Stream Direct modes when you want
to hear the truest possible reproduction of a
source. All unnecessary signal processing is
bypassed.
• While listening to a source, press
AUTO/
DIRECT
to select Stream Direct mode.
• AUTO SURROUND – See Auto playback on
page 28.
• DIRECT – Sources are heard according to
the settings made in the Surround Setup
(speaker setting, channel level, speaker
distance), as well as with dual mono
settings.
1
You will hear sources according
to the number of channels in the signal.
• PURE DIRECT – Analog and PCM sources
are heard without any digital processing.
2
Using the Sound Retriever
When audio data is removed during the
compression process, sound quality often
suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed 2-channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
3
•Press
S.RETRIEVER to switch the sound
retriever on or off.
STANDARD
ADV SURR
STEREO/
A.L.C.
AUTO/
DIRECT
AUDIO
TUNER EDIT
MASTER
STEREO/
A.L.C.
Front left
speaker
Front right
speaker
F.S.S.ADVANCE position.
STANDARD
ADV SURR
STEREO/
A.L.C.
AUTO/
DIRECT
AUDIO
TUNER EDIT
MASTER
AUTO/
DIRECT
Note
1In the DIRECT mode, Phase Control, Sound Delay, LFE Attenuate and Auto Delay functions are available.
2There are cases where a brief noise is heard before playback of sources other than PCM. Please select AUTO SURROUND or
DIRECT if this is a problem.
3 The Sound Retriever is only applicable to 2-channel sources.
MIDNIGHT
PHASE
S.RETRIEVER
BD MENU
VOL
S.RETRIEVER
VSX_519V_KU.book Page 30 Wednesday, December 24, 2008 4:38 PM