Pioneer VSX-21TXH Stereo Receiver User Manual


 
7
Operations on the Receiver and Cable Connections
Connect the receiver and the computer in order to display on the computer the various data measured on
the receiver itself.
1 Connect the receiver to your PC with an RS-232C cable.
Before making or changing connections, switch off the power and disconnect the power cord from
the power outlet. Plugging in components should be the last connection you make with your
system.
When using a notebook computer or other computer without an RS-232C terminal, this application can
be used by connecting the receiver via USB using a commercially available USB-RS-232C conversion
cable (USB-Serial cable). When using USB connections, be sure to select the proper COM port
number for data transmission (see page 9
).
The type of cable to use is a female-female cross cable. Different manufacturers use different names to
refer to this type of cable. Sometimes it is called an “interlink” cable, and sometimes it is called a
“reverse” cable.
Pin-out diagram of RS-232C cable to connect receiver and PC
• The following cable has been proved to ensure system operation.
Caution
Note
Brand Cable Part NO.
Belkin Pro Series Serial Direct Cable-10 feet F3B207-10
RS-232C
RS-232C
PC
VSX-23TXH/VSX-21TXH/
VSX-9140TXH/VSX-9040TXH
Female-female
cross cable
Dsub 9-pin female
Dsub 9-pin female
Dsub 9-pin female
Dsub 9-pin female
Continue