Pioneer VSX-21TXH Stereo Receiver User Manual


 
33
Troubleshooting (Continued)
Cause 1:
An error message may appear if there are not enough system resources
available.
If an error message appears (like the one explained above in Cause 1) of Advanced MCACC cannot be
installed (page 31), restart your PC and start the installer (PioneerAdvancedMCACC_e_ver_*_*.exe) with
no other applications active.
Cause 2:
Updating of Advanced MCACC may fail because of incompatibilities with other
applications.
Try the following, in the order indicated.
1) If there are any other applications active, exit the other applications and try starting the installer
(PioneerAdvancedMCACC_e_ver_*_*.exe) again.
2) If that does not work, try restarting your PC, and starting the installer
(PioneerAdvancedMCACC_e_ver_*_*.exe) with no other applications active.
Cause:
It is not possible to print reverb characteristics graphs displayed in the “ALL”
mode.
Print after selecting an individual channel or frequency graph.
Cause:
You may not properly use the application software not corresponding to your
receiver.
Check the model number of your receiver and use the application software corresponding to it.
Advanced MCACC cannot be updated
Reverb characteristics graph cannot be printed
Some functions in application operation cannot be used
ALL display
Continue