Filter
Top Products
Listening to the radio
06
34
En
Memorizing stations
You can save up to 30 station presets so that you always
have easy access to your favorite stations without having
to tune in manually each time.
1 Tune to an FM or AM radio station.
Select mono or auto-stereo reception (FM) or the Noise
Cut mode (AM) as necessary. These settings are saved
along with the preset.
2
Press
SETUP
.
3
Select ‘Tuner Setup’ then press ENTER.
4
Choose ‘
ST.Memory
’ then press
ENTER
.
5
Select the station preset you want then
press
ENTER
.
Listening to station presets
1 Make sure the tuner function is selected.
2 Select a station preset.
• Alternatively, use the number buttons to select a
preset directly.
Changing the frequency step
If you find that you can’t tune into stations successfully,
the frequency step may not be suitable for your country/
region.
1
Press SETUP.
2
Select ‘System Setup’, then press ENTER.
3
Select
‘AM9K/10K’, then press
ENTER
.
4 Select a setting then press ENTER to
confirm.
• AM 9K – 9 kHz step for AM;
50 kHz step for FM
• AM 10K – 10 kHz step for AM;
100 kHz step for FM
SETUP
ENTER
ENTER
ENTER
-
+
ST
SETUP
ENTER
ENTER
ENTER
HTS-LX70_En.book Page 34 Wednesday, August 8, 2007 4:44 PM