Filter
Top Products
Using the tuner
06
23
En
English
4 Use the
/
(cursor left/right) buttons to select
a preset number in which to store the station.
• You can also use the
<
and
>
buttons on the front
panel.
5 Press ENTER.
After pressing
ENTER
, the preset class and number stop
blinking and the receiver stores the station.
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets
on page 22 if you haven’t done this
already.
1 Press FM/AM to select the tuner.
2 Press CLASS to select a class (A, B or C).
Press repeatedly to change the class displayed in the
front panel display.
3 Use the STATION +/– buttons to select the preset
you want.
Note
• If the receiver is left disconnected from the AC power
outlet for an extended period, the station memories
will be lost and will have to be reprogrammed.
Naming station presets
You can name saved presets with four-character names.
1 Use the CLASS and STATION +/– buttons to find
the station preset you want to name.
2 Press TUNER EDIT.
3 Use the
/
(cursor left/right) buttons to select
a character, then press ENTER.
After pressing
ENTER
, the cursor moves to the next
charcter space.
4 Repeat step 3 to enter the remaining three
characters.
Pressing
ENTER
after the fourth character stores the
station name.
STATION
FM/AM CLASS
INPUT SELECTOR
TUNER
EDIT
ENTER
–+
SX-315.book Page 23 Friday, February3, 2006 12:18 PM