Filter
Top Products
Reception System (Digital) ATSC Digital TV System
Circuit Type 8VSB/64QAM/256QAM/QPSK demodulation
Tuner VHF/UHF VHF 2ch to 13ch, UHF 14ch to 69ch
CATV Ch. 2 to 135
Audio Format Dolby Digital
Reception System (Analog) American TV standard NTSC system
Circuit Type Video signal detection PLL full synchronous detection, PLL digital
synthesizer system
Tuner VHF/UHF VHF Ch. 2 to 13, UHF Ch. 14 to 69
CATV ANTENNA/CABLE A IN: Ch. 1 to 135 Cable: Ch. 1 to 125
Audio Multiplex BTSC system
Terminals Rear ANTENNA/CABLE A IN 75 ohms UNBAL, F type for DTV/VHF/UHF/CATV in
ANTENNA B 75 ohms UNBAL, F type for VHF/UHF/CATV in loop out
INPUT 1 S-Video input, Video input, Audio input
INPUT 2 Component Video input, S-Video input, Video input, Audio input
INPUT 3 Component Video input, Audio input
PC Analog RGB input, Audio input
INPUT 5 HDMI input*, Audio input
INPUT 6 HDMI input*, Audio input
MONITOR OUT Video output, Audio output
Digital Audio Output Optical
G-LINK 1
ETHERNET 1
CONTROL IN 1
CONTROL OUT 1
SPEAKER (except PRO-940HD) 8 ohms to 16 ohms
SUBWOOFER OUTPUT Variable
CableCARD Point of Deployment
Side INPUT 4 Component Video input, Video input, Audio input
USB USB input**
OSD English/French/Spanish
Resolution Frequency
720 x 400 70 Hz
640 x 480 60 Hz
72 Hz
75 Hz
800 x 600 60 Hz
72 Hz
75 Hz
1024 x 768 60 Hz
70 Hz
75 Hz
1280 x 720 60 Hz
1280 x 768 60 Hz
1280 x 1024 60 Hz
■ Built-in Media Receiver
(PRO-1540HD/PRO-1140HD/PRO-940HD)
PRO-FHD1 PRO-1540HD PRO-1140HD PRO-940HD
Light Emission Panel 50-inch plasma display panel 60-inch plasma display panel 50-inch plasma display panel 42-inch plasma display panel
Number of Pixels 1920 x 1080 1365 x 768 1365 x 768 1024 x 768
Power Supply 120 V AC, 60 Hz 120 V AC, 60 Hz 120 V AC, 60 Hz 120 V AC, 60 Hz
Standby Power Consumption 0.3 W 30 W 26 W 26 W
Power Consumption 420 W 460 W 355 W 312 W
External Dimensions (W x H x D) 50-15/32" x 29-9/16" x 3-7/8" 57-7/8" x 34-21/32" x 4-21/32" 48-3/16" x 28-1/4" x 4-1/2" 40-15/16" x 26-3/4" x 4-1/2"
(1282 x 750.5 x 98 mm) (1470 x 880 x 118 mm) (1224 x 717 x 115 mm) (1040 x 679 x 115 mm)
Weight 87 lbs. 12 oz. 113.6 lbs. 75.7 lbs. Main unit: 64.4 lbs. (29.2 kg)
(39.8 kg) (51.5 kg) (34.3 kg) Stand (incl. bolts): 5.5 lbs. (2.5 kg)
Total: 69.9 lbs. (31.7 kg)
1312
■ Specifications (Display Panels)
Pin No. Signal
1R
2G
3B
4Not connected
5Not connected
6GND (ground)
7GND (ground)
8GND (ground)
9 +5V
10 GND (ground)
11 Not connected
12 SDA
13 HD
14 VD
15 SCL
■
Signal Assignment of PC Input (15-pin Mini D-sub Connector )
(PRO-1540HD/PRO-1140HD/PRO-940HD)
Color System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
Terminals INPUT 1 DVI (DVI-D)
INPUT 2 HDMI*
INPUT 3 HDMI*
INPUT 4 BNC (Component Video or Analog RGB)
INPUT 5 S-Video
INPUT 6 Video
■ Color System and Terminals (PRO-FHD1)
Front View
Command Function
UP1,5 Increase Adjustment Value by 1,5
UP0 Increase Adjustment Value by 10
UPF Select the Maximum Adjustment Value
DW1,5 Reduce Adjustment Value by 1,5
DW0 Reduce Adjustment Value by 10
DWF Select the Minimum Adjustment Value
■ RS-232C Supplementary Command List
(PRO-1540HD/PRO-1140HD/PRO-940HD)
Command Function
AMT S00 AUDIO Mute OFF
AMT S01 AUDIO Mute ON
AVS S01 AV Selection : STANDARD
AVS S02 AV Selection : DYNAMIC
AVS S03 AV Selection : MOVIE
AVS S04 AV Selection : GAME
AVS S06 AV Selection : PURE
AVS S07 AV Selection : USER
AVS S08 AV Selection : ISF-DAY
AVS S09 AV Selection : ISF NIGHT
CHN FWD/REV Switch Preset Channel
FCS S00 FOCUS OFF
FCS S01 FOCUS ON
FWD Preset ch (1 step forward)
GDI Get Command for Status
INP S01 INPUT1 (Main Screen)
INP S02 INPUT2 (Main Screen)
INP S03 INPUT3 (Main Screen)
INP S04 INPUT4 (Main Screen)
INP S05 INPUT5 (Main Screen), HDMI
INP S06 INPUT6 (Main Screen), HDMI
INP S07 INPUT7 (Main Screen), PC
INA INPUT Antenna A ch
(Analog/Digital Terrestrial Broadcast)
INB INPUT Antenna B ch (Analog Terrestrial Broadcast)
MST S00 Single-Window Display
MST S01 Multi-Window : 2-screen(Main Screen Size : Normal)
MST S02 Picture-in-Picture (Lower Right)
MST S03 Picture-in-Picture (Upper Right)
MST S04 Picture-in-Picture (Upper Left)
MST S05 Picture-in-Picture (Lower Left)
MST S06 Multi-Window : 2-screen(Main Screen Size : Medium)
MST S07 Multi-Window : 2-screen(Main Screen Size : Large)
MST S08 SWAP (Replace Subscreen for Picture-in-Picture)
OSD S00 OSD Display OFF
OSD S01 OSD Display ON
POF Power OFF
PON Power ON
REV Preset ch (1 step backward)
SRS S00 SRS OFF
SRS S01 SRS ON
SZM S00 Screen Size : Dot by Dot/PARTIAL
SZM S01 Screen Size : 4:3
SZM S02 Screen Size : FULL/FULL1080i
SZM S03 Screen Size : ZOOM
SZM S04 Screen Size : CINEMA
SZM S05 Screen Size : WIDE
TBS S00 TRUBASS OFF
TBS S01 TRUBASS ON
VOL Vol
VMT S00 VIDEO Mute OFF
VMT S01 VIDEO Mute ON
■ RS-232C Command List
(PRO-1540HD/PRO-1140HD/PRO-940HD)
*Supports HDMI 1.1 and HDCP 1.1.
HDCP (High-bandwidth Digital Content Protection) is a technology used to protect copyrighted digital
content that use Digital Visual Interface (DVI).
*Supports HDMI 1.1 and HDCP 1.1.
HDCP (High-bandwidth Digital Content Protection) is a technology used to protect copyrighted digital content that use Digital Visual Interface (DVI).
** Supports USB 1.1 and USB 2.0.
Note: INPUT 1 (DVI) also supports 1280 x 1024 at 75 Hz, and 1920 x 1080 at 60 Hz signals.
■ PC Signal Compatibility Table (PRO-FHD1)
Power cord (6.6 ft. / 2 m) x 1
Remote control unit x 1
AA (R6) batteries x 2
Cleaning cloth x 1
Speed clamps x 2
Bead bands x 2
BNC/Pin conversion adapter x 3
Warranty x 1
Operating instructions x 1
Note: Design and specifications are subject to change for improvements without notice.
■ Accessories (PRO-FHD1)
Power cord (6.6 ft. / 2 m) x 1
G-LINK cable (9.8 ft. / 3 m) x 1
Remote control unit x 1
AA (R6) batteries x 2
Cleaning cloth x 1
Speed clamps x 3
Bead bands x 3
Ferrite core x 1
Hexagonal wrench x 1 (PRO-940HD only)
Terminal position sheet* x 1 (PRO-1540HD only)
Warranty x 1
Operating instructions x 1
■ Accessories
(PRO-1540HD/PRO-1140HD/PRO-940HD)
Resolution Frequency
720 x 400 70 Hz
640 x 480 60 Hz
72 Hz
75 Hz
800 x 600 56 Hz
60 Hz
72 Hz
75 Hz
1024 x 768 60 Hz
70 Hz
75 Hz
1360 x 768 60 Hz
■ PC Signal Compatibility Table
(PRO-1540HD/PRO-1140HD/PRO-940HD)
* For use when mounting the PDP on the wall.
Note: Design and specifications are subject to change for improvements without notice.
Command Command Name Function
PON POWER ON Power ON
POF POWER OFF Power OFF
INP INPUT Switch between Inputs
SSI SUB INPUT Switch between Subscreen Inputs
VOL VOLUME Adjust the Volume
AMT AUDIO MUTE Set Audio Mute
SZM SCREEN SIZE Switch between Screen Sizes
AVS AV SELECTION Switch between AV Selection Modes
MST MULTI SCREEN Switch between Multi-Screen Modes
OSD OSD OSD Display ON/OFF
FCS FOCUS Surround Mode: FOCUS
SRS SRS SURROUND Surround Mode: SRS SURROUND
TBS TRU-BASS Surround Mode: TruBass
PUC PURE CINEMA Select PureCinema
CTP COLOR TEMP Set Color Temperature
DNR DNR Set Digital Noise Reduction
MNR MPEG NR Set MPEG Noise Reduction
GMM GAMMA Set Gamma
IID ISF INFO Display ISF Information
■ RS-232C Command List (PRO-FHD1)
Command Function
UP1, 5 Increase Adjustment Value by 1, 5
UP0 Increase Adjustment Value by 10
UPF Select the Maximum Adjustment Value
DW1, 5 Reduce Adjustment Value by 1, 5
DW0 Reduce Adjustment Value by 10
DWF Select the Minimum Adjustment Value
■ RS-232C Supplementary Command List
(PRO-FHD1)