Filter
Top Products
PRV-LX1 RS-422A Protocol
1.0 Foreword
The PRV-LX1 can be controlled externally using RS-422A commands. Control is applied through the
REMOTE IN and REMOTE OUT D-Sub 9 connector on the rear panel. Set the RS-422A REMOTE
controls through the main menu. Press the Function button on the PRV-LX1’s front panel to access the
menu. Control Settings are accessed through the Setup menu.
The REMOTE IN connector is used when controlling this unit with an external device. The REMOTE
OUT connector is used for external control with this unit.
Note: This document is valid for PRV-LX1 System Version 3.01/1.04 or later/
Page 2 of 18